-
-
Search
-
Contact us
-
Log in
Provider instructions
The instructions providers have to follow
The information you can access on this page does more than outline the critical procedures you're required to follow in your capacity as a specialist provider. It also provides essential tools to keep you and your team safe on the worksite when working with electricity.
Acquiring land and easements
If you need to acquire easements or land on Sydney Water's behalf for infrastructure purposes, we have information to help you work through the process. This includes when an easement or land is required, requirements and conditions and how to progress the acquisition.
- Water mains – minimum easement widths
- Water main easement – below ground / above ground works: typical layout in private property
- Water main easement – below ground / above ground works: typical layout in open land, parks, reserves, etc.
- Community title subdivisions – location of water mains and easement layout: option 1 (preferred location)
- Community title subdivisions – location of water mains and easement layout: option 2
- Community title subdivisions – location of water mains and easement layout: option 3
- Conventional subdivisions with private accessways: location of water mains and easement layout
Constructing new pipes
You must follow these instructions when defining, designing and constructing water and wastewater infrastructure.You must read these instructions with either the related Water Services Association of Australia(WSAA) codes and Sydney Water supplements or the Sydney Water editions of the WSAA codes.
- Instructions to constructors – major works
- Instructions for constructors – minor works (wastewater)
- Instructions to designers – major works
- Instructions and technical requirements for drillers
- Instructions to field testers
- Instructions to provide a service protection report
- Instructions to under pressure cut-in connection (UPCIC) providers
- Instructions to water servicing coordinators – major works
- Instructions to water servicing coordinators – minor works (wastewater)
Please use the documents below alongside the instructions.
- Procedure for providers addressing a non-case CAR
- Health & safety procedure: Confined space safety
- Health & safety guide: Fitness and aptitude assessment guidelines for working In confined spaces
- Generic asset hazards/conditions – at the point of connection
- Pipe sizing and grading tables
- Procedure for capping, swabbing, flushing and testing new water mains
- Procedure: Safety in Design
- Safety in Design: frequently asked questions
- Guide: Section 73 plan requirements
- Procedure: Soil assessment for installation of ductile iron pipes without sleeving
Working safely with electricity
These documents were presented to providers at a Sydney Water Electrical Safety Awareness seminar. They help you to work safely near electricity.
- Example: Work on main to meter with electrical safety measures in place (CDCM0031 SWMS21 – 2011)
- Example: Work on water mains with electrical safety measures in place (CDCM0037 SWMS22A – 2011)
- Presentation: Electrical safety awareness seminar introduction
- Presentation by Developer Works Inspection team: Electrical safety for work on metallic water pipework
- Websites: Electrical safety for plumbers (2012)
- Example: Sydney Water electrical safety folder for supervisors